Your Pool and snooker table professionals in Spain & Gibraltar

Tel: (+34) 609 50 44 27

Fax: (+34) 952 66 72 06

Home | Profit Share | Services | Products List | Snooker | Used Tables | Pool Leagues | Competitions | News | Contact Us

Moving, levelling, recovering and installing billiard tables is a specialist job that needs to be undertaken by people who know how to do this type of work. There can be 1 to 5 pieces of slate depending on the type and size of table, these can weigh up to 200 kilos each. Slates need to be levelled and mated properly.
It can be surprising the number of snooker 'and other billiard' tables on the coast that have not been fitted correctly... we have even come across tables where the cloth has been put on the wrong way around! All done by companies or people on the coast that are supposed to know what they are doing. There are many people who will tell you they know how to do this work but getting them to show you their work will not be as easy, we have no problem letting you see our work, in fact we are proud of our work and to be one of the very few companies on the coast that understand about billiard tables.

If you are looking for a company to dismantle, erect, service, level, recover, replace pocket rails, replace pocket leather or nets, repair a damaged slate or maintain your billiard table then look no further... we can undertake all your billiard table needs. Billiards experience stretching back 25 years.

Below are a few examples of various billiard tables we have supplied our services on. 

This is an 9' American pool table we supplied and erected in the games room of a Villa in the Estepona area of the Costa del sol.

The table is a BCE Atlanta American pool table in Rosewood colouring with green speed cloth.

Private work - December 2011

This is an 12' (Full size) snooker table we fitted (erected) in the Marbella area of the coast.

This is a table the property owner brought over from the UK and needed a company to erect the table.

Private work - November 2011

This is an 12' snooker table we recovered in blue coloured 6811 Tournament cloth.

This is a lovely old antique oak Burroughs & Watts table which has steel block cushions, the bed cloth was damagaed and the client contracted us to recover the table with a new bed and cushion cloth.

Private work - October 2011

This is an 8' Luengo American pool table we dismantled, repaired, erected and recovered in burgandy coloured cloth to suit the decor of it's new location. This table is a 3 slate table and was manufacturered by Luengo in northern Spain.

Private work - October 2011

This is an 8' Sanerra Millenium American pool table we sold and erected for a client in Sotogrande. This table is a 3 slate table and was supplied in black with red cloth.

The Sanerra Millenium pool table is a great looking pool table as you can see. This table not only has a stylish contemporary look but is also offers a quality game of pool.

Private work - December 2010

This is an antique carambole billiards table we assembled for a client near Marbella. The client also wanted a new cloth so we recovered the cushions and slate with SuperPro worsted cloth.

This table has an under slate heating system consisting of 6 element panels which needed to be assembled in series.

Private work - October 2010

This is an antique Burroughs & Watts table with steel block cushions, we dismantled, moved and then re assembled this table to another location in San Pedro for the client.

Private work - August 2010

This is an antique Brunswick American pool table we assembled for a client near Marbella. The client also wanted a new cloth so we recovered the cushions and slate with SuperPro worsted American pool cloth.

Private work - August 2010

This is an 12' Riley snooker table we supplied and assembled for a client in Nueva Andalucia, Marbella.

We had this table delivered directly to the client from the UK, then on arrival we erected the table.

There is a time lapse video available of this table being erected, the video is on the work videos page Videos of work undertaken

Private sale - July 2010

This is an 9' Riley snooker table we sold and assembled for a client in Valencia.

We had this table delivered directly to the client from the UK, then on arrival we traveled to Valencia to erect the table.

Private sale - June 2010

This is an 8' American pool table we assembled and recovered with a new Superpro worsted cloth for a client in Benalmadena.

The cushion rubbers on this table had lost their bounce and where breaking up so these had to be replaced with new rubber, this was also undertaken by us.

Private table fitting and recover - June 2010

This is a 10' Riley snooker table that we moved from one room of a property in Marbella to another room in the same property.

The owners took advantage of the table move to have the it recovered in top quality 6811 Tournament cloth.

Private table fitting and recover - May 2010

This is a K-Steel 8 we fitted and recovered with a custom printed cloth supplied by us for the client in Sotogrande.

We designed a cloth to the specification of the client, this cloth was then printed on a specialist machine for printing billiard table cloth in the UK, it was shipped to Spain and then fitted by us.

Private table fitting and recover - May 2010

This is a full size (12') FC Snooker table in oak, Classic model which we supplied and fitted for a client in Tarragona. The table was also supplied with a 6 shade brass coloured lighting bar with green shades.

We had this table delivered directly to the client from the UK, then on arrival we traveled to Tarragona to erect the table.

Snooker tables need to be installed by a person/people who know how to install them properly. Full size snooker tables generally consist of 5 slates that can weight around 200 kilos each! These need to be level and mated correctly. Tables need to be covered properly, including around the slate cut outs for the pockets. This work should only be undertaken by billiard table specialists.

Private table sale - April 2010

This is a 2 mt. antique French carambole table which was restored by the owner in the Benalmadena area.

The table was purchased without any cushions and with some wooden trim missing, we constructed new cushion supports in timber and then fitted a set of carambole rubbers to them. We also manufactured new trim then recovered the table with a new cloth.

The photo shown was taken when we finished our work to the table, although the owner still had to age in/match the replacement trim on the table.

Private table work - April 2009

This is a full size Enbild table that was not installed correctly by who every first installed the table in this location (A classic example of why you should make sure you use people who know about fitting tables). This type of table has an inbuilt leveler in each leg, one leveler was missing and another needed an adjusting nut. At some stage wooden wedges where used to support/stop the side rails from sinking into the leg recess where these levelers where not used properly or missing, this was not only a problem for the tables level but was also dangerous.

We dismantled the table, replaced the missing leveler along with the missing adjustment nut, we then re-leveled the table and recovered it in 6811 Tournament cloth. The rubbers had to be re-glued as 'although still lively' had come loose from the rails. We also replaced the pocket leathers and nets as these had seen better days.

There is a time lapse video available of the work done to this table, the video starts from the moment the bed cloth and cushions had been removed and the cushions recovered, the video is on the work videos page Videos of work undertaken

Private repair and recover - June 2010

This is a 9' Elite Snooker table we supplied and installed to a client in Cordoba.

This table was imported from the UK manufacturer by us and then we installed the table at it's location in Cordoba.

Private sale & fitting - June 2011

These are two seven foot Supreme pool tables in the 'Pueblito de Alfiax' resort in Los Gallardos, Almeria. These tables where supplied in oak coloured finish and to have matching lights and cloth to suit the decoration of the pool room.

We also supplied an exterior ping pong table, foosball table and a pool table with folding legs for the same complex.

Sale and assembly.

This is an 8' Cordoba Billards American pool table we fitted in a private home in the Marbella area.

The client had purchased the table some years ago and when moving from the north of Spain to the south.
Understanding that the table should be installed by billiard table specialists he called us to do the fitting.

Billiard tables need to be installed by a person/people who know how to install them properly. Slates that can weight as much as 200 kilos each! These need to be level and mated correctly. This work should only be undertaken by billiard table specialists.

Private fitting - Feb 2010

This billiard club contacted us when they had problems with some of their Brunswick tables, we re-leveled and recovering 5 of these 9' tables. The tables in this location had sunk slightly in the middle which contributed to another problem with the joints in the slates, we re-leveled and recovered these tables.

One of the other problems with these tables was that they would move or slide slightly on the parquet flooring, this would cause a very slight movement on the table structure and so eventually damage the joints in the slate bed, we solved this problem by supplying rubber shoes to prevent the tables from moving on the parquet flooring and so eliminate the problem.

Billiard club - Oct 2009

We supply professional snooker table services, snooker tables on profit share, snooker table sales. Quality snooker tables and services in Spain, Gibraltar and Portugal.

© Econpool.com 2007 - 2012